welcome to NOKI INSTRUMENT,we supply instrument you need for 24 hour!

email us:

[email protected]

call us:

008618530078345

home » products » Constant Temperature Humidity Chamber
Constant Temperature Humidity Chamber

Temperature Humidity Chamber

Constant temperature humidity chamber is a constant climate chamber that can simulate a certain temperature and humidity. It is mainly used to test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials.

This equipment is widely used in the testing and reliability testing of electronic and electrical engineering, aerospace plastics, auto parts, medical treatment, building materials, military industry and other products.

Noki constant temperature humidity chamber has a very wide temperature and humidity range, with a variety of capacity and temperature change rate for you to choose. The maximum heating rate and cooling rate can reach 15 ℃/min.If you have special requirements for product parameters, please contact us to provide you with customized services.

TS Series Benchtop Environmental Chamber

TS Series Benchtop Environmental Chamber

The benchtop environmental chamber as a small humidity and temperature controlled chamber, is small in size and low in energy consumption. This kinds of test chamber and can be used on a desktop. It is a necessary testing equipment in the fields of aviation, automobiles, home appliances, scientific research, etc.

And it is mainly used to test and determine the parameters and performance of electrical, electronic and other products and materials after temperature, humidity or constant temperature environment changes.

Noki TS series benchtop temperature and humidity test chamber comply with GB/T5170.5-2008, GB/T10586-2006, GB/T2423.3-2006 and other standards. Non-standard products can also be manufactured according to customer requirements.

get a quote

LS Series Vertical Temperature Humidity Chamber

LS Series Vertical Temperature Humidity Chamber

Vertical constant temperature and humidity test chamber has a larger overall size than the benchtop type. The inner box is made of 304 stainless steel, and the outer box is sprayed with rust-proof cold-rolled plates. Reasonable structure design, separation of water and electricity.

It used to test and determine the parameters and performance of products and materials after high temperature, low temperature, alternating damp heat or constant temperature changes. This test chamber has good temperature uniformity and high test accuracy.

Temperature Range: -70℃-150℃ Humidity Range:20-98%R.H

(Other temperature & humidity ranges are also available. If you have specific temperature range and humidity range requirements, please contact us to provide you with customized services.)

get a quote

Find the environmental test chamber you need quickly with your industry!

get a quote

Specifications of Temperature Humidity Chamber

Model Working Room Size(WxHxD) Outer Box Size(WxHxD) Temperature Range Humidity Range Fluctuation/Uniformity Heating Rate
NKHS-22-TS 30x30x25 100x79x83 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-36-TS 30x40x30 100x89x88 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-50-TS 35x45x35 105x89x93 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-63-TS 40x40x40 110x89x98 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-80-LS 40x50x40 60x162x138 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-100-LS 50x50x40 70x162x138 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-150-LS 50x60x50 70x172x148 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min
NKHS-250-LS 60x75x55 80x185x148 -70℃-150℃ 20-98%R.H ±0.5℃/±2℃ 1.0-3.0℃/min

Note:The above data were measured at ambient temperature (QT) 25℃ without load in the working room.

All size specifications can be customized.

Structure composition

Control System Description
Controller 7-inch high-definition true color LCD touch screen
Accuracy Range Setting accuracy: temperature 0.01℃, humidity 0.1%R.H, indication accuracy: temperature 0.01℃, humidity 0.1%R.H
Sensor Platinum resistance PT100Ω/MV
Heating System Fully independent system, nickel-chromium alloy electric heating heater
Humidification System External isolation room, all stainless steel shallow surface evaporative humidifier
Dehumidification System Using evaporator coil dew point temperature laminar flow contact dehumidification method
Water Supply System The humidification water supply adopts automatic control, and the remaining water can be recovered, saving water and reducing consumption
Refrigerating System French "Tecumseh" fully enclosed air-cooled compressor for refrigeration
Circulatory System Temperature-resistant and low-noise air-conditioning motor, multi-blade centrifugal wind wheel
Structure Material Outer box: rust-proof cold-rolled plate spraying Inner Box: 304 stainless steel
Insulation Material Polyurethane rigid foam/superfine glass fiber cotton
Door Frame Insulation Double-layer high and low temperature aging resistance silicone rubber door sealing strip
Heating/Humidification Nickel-chromium alloy heating tube
Error Alarm Leakage, short circuit, over temperature, water shortage, motor overheating, compressor overpressure, overload, over current protection, controller power failure memory
Voltage AC220/380V±10% 50±0.5Hz three-phase five-wire system
Ambient Temperature 5℃-+30℃≤85%R.H

Note:The above data were measured at ambient temperature (QT) 25℃ without load in the working room.

All size specifications can be customized.

Core Configuration

  • Constant Temperature Humidity Chamber

    French Tecumseh and German Bock Compressor Unit

  • Constant Temperature Humidity Chamber

    PWM Control Valve Customized by American "SPORLAN" Company

  • Constant Temperature Humidity Chamber

    High-Efficiency Power-Saving Ultra-Low Temperature Air-Cooled Condenser

  • Constant Temperature Humidity Chamber

    US "Honeywell" Environmentally Friendly Refrigerant R-404A/R23

  • Constant Temperature Humidity Chamber

    "Danfoss Denmark" Filter Drier

  • Constant Temperature Humidity Chamber

    South Korea "AUTONICS" Over-Temperature Protector

  • Constant Temperature Humidity Chamber

    Korea "Rainbow" dry burn protector

  • Constant Temperature Humidity Chamber

    Color touch screen, screen backlight can be timed and brightness adjustable

Executive Standard

Our Test Chambers Meet Following Standards

  • GB/T10592-2008 High And Low Temperature Test Chamber Technical Conditions
  • GB/T2423.1-2008 Low Temperature Test Chamber Test Method
  • GB/T2423.2-2008 High Temperature Test Chamber Test Method
  • GB/T2423.3-2006 Test Method For Humidity Heat Test Chamber
  • GB/T2423.4-2008 Alternating And Humidity Test Method
  • IEC60068-2- 2005 Environmental Testing Related Section
  • GJB 150.3 High Temperature Test
  • GJB1 50.4 Low Temperature Test
  • GJB 150.9 Humidity Test

Testing Chamber Performance Confirmation Meets The Standard

  • GB/T2424.5-2006 Environmental Test for Electrical and Electronic Products
  • GB/T2424.6-2006 Environmental Testing of Electrical and Electronic Products Temperature Performance Test of Humidity Test Chamber
  • GB/T51 70.2-2008 Electronic and Electrical Products Environmental Testing Equipment Inspection Method +Temperature Test Equipment
  • JJF1101-2003 Environmental Test Equipment Temperature and Humidity Calibration Specifications

Find the environmental test chamber you need quickly with your industry!

get a quote

Temperature and humidity control range diagram

Constant Temperature Humidity Chamber

Security system

  • 1.Over temperature alarm
  • 2.Leakage protection
  • 3.Lack of phase protection
  • 4.Over current protection
  • 5.Fast fuse
  • 6.Voice alarms.etc.
  • 7.Overpressure protection
  • 8.Line fuses and fully sheathed terminals
  • 9.Grounding protection
  • 10.Water shortage and gas shortage protection

leave message to us!

NOKI INSTRUMENT is a professional manufacturer of environmental climate chambers and provides OEM services. Welcome to contact us through the following contact information:
Email address: [email protected],Whatsapp: 008618530078345!

you may link: view list...
Freeze Thaw Chamber

Freeze Thaw Chamber

Pharmaceutical Stability Test Chamber

Pharmaceutical Stability Test Chamber

Ozone Aging Test Chamber

Ozone Aging Test Chamber

Xenon Lamp Aging Test Chamber

Xenon Lamp Aging Test Chamber

Uv Aging Test Chamber

Uv Aging Test Chamber

Dust Test Chamber

Dust Test Chamber

Salt Spray Test Chamber

Salt Spray Test Chamber

Rain Test Chamber

Rain Test Chamber

Walk-In Environmental Chamber

Walk-In Environmental Chamber

Thermal Shock Chamber

Thermal Shock Chamber

Copyright (©) 2021 NOKI INSTRUMENT Copyright Information  Privacy policy

phone

whatsapp

email

-->